Remote Meter for Solar Controller RM 1

Advantages

 

Multi-function LCD, which can display the charging status and system parameters.

Single button design, the operation is very convenient.

It can browse the parameters automatically; each parameter will be shown on the LCD every five seconds.

Eight status indicators that can display the corresponding items, the parameter check-up is intuitive.

Adopts standard RJ12 communication interface.

Without external power source, the controller can be normally use by link with USB.

Industrial level design, which can be used under all kinds of severe environments.

Technical specification

Parameters Value
Model RM 1
Working Current < 25 mA (LCD Back Light ON)
< 10 mA (LCD Back Light OFF)
Communication Interface RJ12 (6 needles)
Length of USB 2,0 m
Weight 0,50 kg
Working Temperatur -35℃ ~ +65℃
Dimensions 116 x 116 x 28 mm

We reserve the rights to make alterations to the design of product in the interests of technical progress without notice.

 

Warranty


• 2 years for product defects.

 

Installation Safety Guide


• Only qualified personnel should install or perform maintenance;
• Be aware of dangerous high DC voltage;
• Do not damage or scratch the rear surface of the module;
• Do not handle or install modules when they are wet.

Remote Meter for Solar Controller RM 3

Advantages

 

External LCD display for MT 2410, MT 2420 and MT 2430). Touch Screen System.

Multi-function LCD, which can display the charging status and system parameters.

Single button design, the operation is very convenient.

It can browse the parameters automatically; each parameter will be shown on the LCD every five seconds.

Eight status indicators that can display the corresponding items, the parameter check-up is intuitive.

Adopts standard RJ12 communication interface.

Without external power source, the controller can be normally use by link with USB.

Industrial level design, which can be used under all kinds of severe environments.

Technical specification

Parameters Value
Model RM 3
Working Current < 25 mA (LCD Back Light ON)
< 10 mA (LCD Back Light OFF)
Communication Interface RJ12 (6 needles)
Length of USB 2,0 m
Weight 0,25 kg
Working Temperatur -35℃ ~ +65℃
Dimensions 116 x 116 x 28 mm

We reserve the rights to make alterations to the design of product in the interests of technical progress without notice.

 

Warranty


• 2 years for product defects.

 

Installation Safety Guide


• Only qualified personnel should install or perform maintenance;
• Be aware of dangerous high DC voltage;
• Do not damage or scratch the rear surface of the module;
• Do not handle or install modules when they are wet.